Samsung Dryer Error Codes
9 published guides for Samsung dryer appliances. Check the model-specific scope before using a guide.
Find the spelling on your display
Alternate spellings are listed beside the main code when our database groups them in the same guide. They are not interchangeable on every model. Open the guide to check applicability, likely causes and owner checks; a code identifies a condition, not automatically a part to replace.
| Code / recorded aliases | Guide | Severity |
|---|---|---|
| 2E 9C1, 9E1 | Samsung Dryer 9C1 / 2E / 9E1 — Abnormal supply-voltage error | high |
| AE AC, AC7, AE3, AE4, AE5 | Samsung Dryer AC / AE / AE3 / AE4 / AE5 — Communication error | medium to high |
| BE2 BC2 | Samsung Dryer bC2 / bE2 — Stuck or shorted button | low to medium |
| DF | Samsung Dryer dF — Door-circuit failure | medium |
| DO DC, DE | Samsung Dryer dC / dE / dO — Door-open error | low to medium |
| FE FC | Samsung Dryer FC / FE — Power-frequency error | high |
| HE 1HC, HC | Samsung Dryer hC / hE / 1 HC — Overheat / invalid heating-temperature error | high |
| TC2 TC, TE, TO, TS | Samsung Dryer tC / tE / tC2 / tS / tO — Temperature-sensor / thermistor error | medium |
| TC5 TE3, TE5 | Samsung Dryer tC5 / tE5 / tE3 — Vent / secondary-temperature-sensor error | high |
Before arranging service
Save a photo of the full code and rating label, and note when the warning appears: at startup, during operation or at the end. Tell the technician whether the appliance completes a cycle and what you already checked. This helps distinguish a recurring fault from an isolated warning.
A low severity label is not a safety clearance. If there is smoke, a burning smell, a leak near electrical parts or a gas smell, stop using the appliance and seek appropriate help. Use repair-cost ranges only after the fault is understood.