About this guide
- Written by ApplianceWorth Editorial Team
- Technical contact Victor — appliance technician
- Record updated 2026-07-01
- Applies to Whirlpool washers
- Confidence medium
- Sources Manufacturer service documentation and field-repair experience · Methodology · Report a correction
The record-update date is a database timestamp, not proof of a fresh model-specific technical review. Check the applicability below and your manufacturer’s instructions before acting on a guide.
What this code means
The washer did not detect enough incoming water within the allowed time.
Most likely causes
- Closed valve or low pressure
- Kinked hose or blocked inlet screen
- Siphoning drain hose or pressure-system fault
Safe checks for the owner
- Open both supply valves fully.
- Inspect hoses and inlet screens after shutting off the water.
Estimated U.S. repair cost
$180–$500, depending on model, access, parts availability and local labor.