KitchenAid Range / Oven Error Codes
13 published guides for KitchenAid range / oven appliances. Check the model-specific scope before using a guide.
Find the spelling on your display
Alternate spellings are listed beside the main code when our database groups them in the same guide. They are not interchangeable on every model. Open the guide to check applicability, likely causes and owner checks; a code identifies a condition, not automatically a part to replace.
| Code / recorded aliases | Guide | Severity |
|---|---|---|
| F1E1 F1E0 | KitchenAid Wall Oven F1E0 / F1E1 — Control and appliance-manager failure | high |
| F2E1 | KitchenAid Wall Oven F2E1 — Stuck or shorted key | medium to high |
| F2E2 F2E0 | KitchenAid Wall Oven F2E0 / F2E2 — Keypad disconnected | medium to high |
| F3E1 F3E0 | KitchenAid Wall Oven F3E0 / F3E1 — Oven temperature-sensor circuit fault | high |
| F3E3 | KitchenAid Wall Oven F3E3 — Meat-probe circuit short | medium |
| F5E3 F5E0 | KitchenAid Wall Oven F5E0 / F5E3 — Door and latch-switch mismatch | high |
| F5E4 F5E1 | KitchenAid Wall Oven F5E1 / F5E4 — Door latch not operating | high |
| F6E3 F6E1 | KitchenAid Wall Oven F6E1 / F6E3 — Oven overtemperature | critical |
| F6E4 | KitchenAid Wall Oven F6E4 — User interface and appliance-manager state mismatch | high |
| F6E9 F6E0, F6E6 | KitchenAid Wall Oven F6E0 / F6E6 / F6E9 — Lost communication between oven controls | high |
| F6EA | KitchenAid Wall Oven F6EA — User interface overtemperature | critical |
| F8E3 F8E0, F8E1, F8E2 | KitchenAid Wall Oven F8E0 / F8E1 / F8E2 / F8E3 — Cooling-fan speed error | high |
| F9E0 | KitchenAid Wall Oven F9E0 — Product wired incorrectly | critical |
Before arranging service
Save a photo of the full code and rating label, and note when the warning appears: at startup, during operation or at the end. Tell the technician whether the appliance completes a cycle and what you already checked. This helps distinguish a recurring fault from an isolated warning.
A low severity label is not a safety clearance. If there is smoke, a burning smell, a leak near electrical parts or a gas smell, stop using the appliance and seek appropriate help. Use repair-cost ranges only after the fault is understood.