About this guide
- Written by ApplianceWorth Editorial Team
- Technical contact Victor — appliance technician
- Record updated 2026-07-01
- Applies to KitchenAid range / ovens
- Confidence medium
- Also displayed as F2E0
- Sources Manufacturer service documentation and field-repair experience · Methodology · Report a correction
The record-update date is a database timestamp, not proof of a fresh model-specific technical review. Check the applicability below and your manufacturer’s instructions before acting on a guide.
What this code means
The control is not detecting a normal connection to the keypad or human-machine interface. F2E0 identifies a disconnected keypad circuit; F2E2 is used when the keypad is disconnected from the HMI assembly.
Most likely causes
- A loose ribbon cable or connector between the keypad and display electronics
- A damaged keypad membrane or touch-panel assembly
- Corrosion, cleaner or moisture in the control-panel area
- A failed user-interface board
Safe checks for the owner
- Disconnect power at the breaker for five minutes and retry once.
- Clean only the exterior control surface with a barely damp cloth and dry it fully.
- Do not remove the control panel or reconnect ribbon cables unless you are trained to service line-voltage appliances.
Estimated U.S. repair cost
$220–$480, depending on model, access, parts availability and local labor.